Flash Tutorial – Black And White Flash Banner
Using this thoroughly explained, detailed flash lesson, I will explain to you how to create black and white flash banner. This banner can be used for any web site or for some presentation. You don’t have to use action script code to make this lesson. Let’s start!
Step 1
First, download black and white photos that we will use for this lesson.
Step 2
Create a new flash document. Press Ctrl+J key on the keyboard (Document Properties) and set the width of your document to 400 pixels and the height to 309 pixels. Select white color as background color. Set your Flash movie’s frame rate to 38 and click ok.
Step 3
Call the current layer photo1. Double-click on its default name (Layer 1) to change it. Press Enter once you have typed in the new name!
Step 4
Choose File > Import > Import to Library. In the file explorer window that appears, find a three photos and Shift-click to select them all. Then click open. If you now open your flash library (Ctrl+L key) you will see three photos that you just imported.
Step 5
Using the Selection Tool (V) and drag and drop technique, move the first photo from flash library on flash stage. After that, while the photo is still selected, go to the Align Panel (Ctrl+K) and do the following:
1. Make sure that the Align/Distribute to Stage button is turned on,
2. Click on the Align horizontal center button and
3. Click the Align vertical center button.
Step 6
While the photo is still selected, hit F8 key (Convert to Symbol) to convert it into a Movie Clip Symbol.
Step 7
Click now on frame 40,80 and 100 and hit F6 key.
Step 8
While you’re still on frame 100, select the Free Transform Tool (Q) and do like it is shown on the picture below!
Step 9
Select the Selection Tool (V), click once on the photo to select it and go to the Properties Panel (Ctrl+F3) below the stage. Select Filters tab from the left side. Click after that on the plus icon and select the Blur filter. Make the adjustments as follows:
Step 10
Click again on plus icon and choose Adjust Color. Make the adjustments as follows:
Step 11
Click now on the Properties Button. On the right, you will see the Color menu. Select Alpha in it and put it down to 0%.
Step 12
Go back on the first frame and repeat steps 9 and 10.
Step 13
Select again the first frame and go to the Properties Panel (Ctrl+F3) below the stage. Make the adjustments as follows:
Step 14
Select frame 80 and repeat the previouse step.
Step 15
Create a new layer above the layer photo 1 and name it photo2.
Step 16
Select frame 80 of layer photo2 and hit F6 key. While you’re still on frame 80 move the second photo from the flash library on the flash stage. While the photo is still selected repeat steps 5 and 6.
Step 17
Click now on frame 125,165 and 185 and hit F6 key.
Step 18
While you’re still on frame 185 repeat steps 8,9,10 and 11. Do this also for frame 80.
Step 19
Select again frame 80 and repeat step 13. Do this alos for frame 165.
We’re done!
Source: flashfridge.com
you may also like:
2 Responses to “Flash Tutorial – Black And White Flash Banner”
Leave a Reply
[...] Flash Tutorial – Black And White Flash Banner Fri Aug 06, 2010 15:11 pm Using this thoroughly explained, detailed flash lesson, I will explain to you how to create black and white flash banner. This banner can be used for any web site or for some presentation. You don’t have to use action script code to make this lesson. Let’s start! Step 1 First, download black and white photos [...] [...]
[...] are getting closer and that is why I decided to make cool holidays flash banner. You don’t have to use action script code to make this lesson. Using this lesson, you will [...]
[...] Flash Tutorial – Black And White Flash Banner [...]
I like the helpful information you provide in your articles. I’ll bookmark your weblog and check again here regularly. I am quite sure I will learn plenty of new stuff right here! Good luck for the next!
thank you very much for your view,it’s very helpfu